Working with old style CMT projects

                                                           (last modified by M.Cattaneo 27 September 2007)

N.B. these instructions are valid for projects that depend on Gaudi up to v18r*. Since Gaudi v19r1 (January 2007), see the instructions on working with CMT install areas

• Open a new window
• source $LHCBHOME/scripts/CMT.csh
  • $Gaudi_release_area is set to /afs/cern.ch/sw/Gaudi/releases
  • $LHCb_release_area is set to /afs/cern.ch/lhcb/software/releases

   

• to work with Gauss : set the environment for this Gauss version
  • GaussEnv v10r0
    • if undefined $Gauss_release_area is set to /afs/cern.ch/lhcb/software/releases
  • cd cmtuser
  • getpack Sim/Gauss v8r0
  • cd Sim/Gauss/v8r0/cmt
  • cmt show uses
    • remove all CMT warnings if any
    • Gaudi packages should be located in $Gaudi_release_area/GAUDI_v11r5
    • LHCb packages should be located in $LHCb_release_area/LHCB_v11r11
    • Gauss packages should be located in $Gauss_release_area/GAUSS_v10r0
  • source setup.csh
  • gmake

   

• to work with a Gaudi Examples : set the environment for the Gaudi version you want to work with
  • GaudiEnv v11r5
  • cd cmtuser
  • getpack GaudiExamples v11r5
  • cd GaudiExamples/v11r5/cmt
  • cmt show uses
    • packages should be located in $Gaudi_release_area/GAUDI_v11r5
  • source setup.csh
  • gmake

   

• to work with Brunel : set the environment for this Brunel version
  • BrunelEnv v18r0
    • if undefined $Brunel_release_area is set to /afs/cern.ch/lhcb/software/releases
  • cd cmtuser
  • getpack Rec/Brunel v18r0
  • cd Rec/Brunel/v18r0/cmt
  • cmt show uses
    • remove all CMT warnings if any
    • Gaudi packages should be located in GAUDI_...
    • LHCb packages should be located in LHCB_v...
    • Brunel packages should be located in BRUNEL_v...
  • source setup.csh
  • gmake

• to work with DaVinci: set the environment for the DaVinci version you want to use
  • DaVinciEnv v8r0
    • if undefined $DaVinci_release_area is set to /afs/cern.ch/lhcb/software/releases
  • cd cmtuser
  • getpack Phys/DaVinci v8r0
  • cd Phys/DaVinci/v8r0/cmt
  • cmt show uses
    • remove all CMT warnings if any
    • Gaudi packages should be located in GAUDI_v...
    • LHCb packages should be located in LHCB_v...
    • DaVinci packages should be located in DAVINCI_v...
  • source setup.csh
  • gmake
• To work with a private version of a project by building it in a different directory
  • set the <project>_release_area environment variable to point to the new directory. For example, development versions of projects are placed in the $LHCBDEV directory.
  • You can pick up the development version of e.g. Brunel by typing
    setenv Brunel_release_area $LHCBDEV
    before typing BrunelEnv